Model A58SE Multi-Turn 58 mm Ethernet Absolute Shaft Encoder

Model A58SE Features

Single/multi-turn absolute encoder (16 Bit ST / 43 Bit MT)
58 mm (2.28”) diameter package
Available in three industrial Ethernet protocols:

EtherCAT® with CoE, FoE, EoE – device profile: CiA DS-406 V4.0.2, Class 3
EtherNet/IP™ position sensor, DLR
PROFINET® I-O (CC-C) – device profile: switchable V4.1, Class 3, 4

Maintenance-free and environmentally-friendly magnetic design
Energy-harvesting magnetic multi-turn technology
No gears or batteries
Low TCO and easy provisioning with internal web server
Shaft loads up to 400 N
Color LEDs for operating condition, bus status, link activity
Compact design with bus cover
MP housing option is most the compact EtherCAT® and PROFINET® model available

download_blue Download Model A58SE datasheet

Configure Model

Configure a 3D model of this encoder with the exact specifications for your application. Then download the files in almost any native format, and design it in to your application.

Configure 3D Model

Purchase Options

Model A58SE Clamping Flange (MH)

6 x 60° 48 mm (1.890") bolt circle
Mounts with either M3 or M4 fasteners

Model A58SE Ethernet absolute synchro flange (MK)

Model A58SE Synchro Flange (MK)

6 x 60° 42 mm (1.654") bolt circle

Model A58SE Ethernet absolute heavy duty clamping flange (MM)

Model A58SE Clamping Flange, Heavy Duty (MM)

6 x 60° 48 mm (1.890") bolt circle

Model A58SE Clamping Flange, Compact (MP)

6 x 60° 48 mm (1.890") bolt circle

Model A58SE Description

The Model A58HE is an EtherCAT®, EtherNet/IP™, or PROFINET®-ready, multi-turn absolute encoder designed for heavy duty industrial applications. It is particularly suited to applications that require Ethernet-based connectivity, and where the encoder must retain position information after power-off events. Easily designed into a wide variety of system applications, the A58SE plugs directly into your network with minimal provisioning for rapid deployment, facilitating data exchange among myriad networked devices. The Model A58SE retains absolute position information even after a power loss, facilitating speedy system recovery at start-up without the need for system re-homing.

Ready for Industry 4.0 and for the Industrial Internet of Things (IIoT), data exchange between the Model A58SE and other applications has no influence on the control loop. The Model A58SE is non-reactive and can work independently from the PLC or master, transferring data through network gateways to other automation networks and sites, and up to the cloud for analysis.

Easily installed with both the Model LCX Draw Wire series and the Model PLMS Linear Measurement Solution.