RX/TX Products were designed to provide solutions for customers who require encoder signals to be transmitted long distances, converted to a different output type, or duplicated for transmission to multiple receiving devices.
This lightweight DIN rail mountable unit, Line Driver and Line Receiver, comes in a stylish green PC/ABS self-extinguishing material blend. It is configurable as a level changer, line repeater, splitter or encoder tester. The RX/TXD will accept TTL, RS422, RS485, PP, NPN, NPN OC, or PNP encoder inputs at 5V, or HTL, PP, NPN, NPN OC & PNP at 5V-24V. It will provide up to 3 outputs in any combination of TTL, RS422, RS485, PP, NPN or PNP, at 5V, or, HTL, PP, NPN or PNP at 6-28V. A series of LEDs on the front panel indicates power and signal presence. Connections are made via the easily accessible screw terminals as standard. This device may be used as both a Line Driver and Line Receiver.
The RX/TX Repeater retransmits signals from a encoder ouput for driving signals over a longer distance with reduced noise and distortion-free waveforms.
The RX/TX Converter converts a Push-Pull or NPN encoder output to an RS422 compatible differential Line Driver output, or vice-versa.
The RX/TX Splitter takes one encoder input and produces two seperate output channels.