Couplings

Couplings

To attach an encoder shaft to another rotating shaft, a coupling device is needed.  Because shaft run-out or endplay can result in excessive loads on encoder bearings, EPC recommends use of flexible couplings designed for encoder applications.  EPC also offers magnetic couplings that can be used for temporary applications, or for attaching hollow bore or thru-bore encoders to large diameter shafts.

Buy now

 

 

 

Shaft Couplings

Stock #

Length

From Shaft Size

To Shaft Size

 

161307

0.87" - 1.00"

0.250"

0.250"

 

161308

0.87" - 1.00"

6 mm

6 mm

 

161309

0.87" - 1.00"

6 mm

0.250"

 

161314

1.00" - 1.01"

6 mm

0.375"

 

161313

1.00" - 1.01"

0.250"

0.375"

 

161317

1.00" - 1.01"

0.375"

0.375"

 

161319

1.50" - 1.60"

0.375"

0.500"

 

 

 

 

Magnetic Couplings

These magnetic couplings are a perfect match for both the Model 260 and Model 25T.  For easier centering on a shaft, a pilot hole is located in the center of the coupling.

Stock #176409-01  For encoders with a 3/8" (0.375") bore.

Download Product Drawings View options now

 

 

 

 


Stock #176282-01  For encoders with a 5/8" (0.625") bore.

Download Product Drawings View options now

 

 

 

 

 

 

Magnets & Holders

 

          

 
Over Shaft Magnet Holders

Easily positions magnet on the end of a shaft.  For a 1/8" (0.125") shaft, use the Press In/On Magnet Holder.  For use with Model 30M Encoder Module.  Includes magnet.
Stock #176596-01  3/16" (0.1875") Bore
Stock #176599-01  1/4" (0.250") Bore

Stock #176600-01  5/16" (0.3125") Bore
Stock #176602-01  3/8" (0.375") Bore

Stock #176604-01  1/2" (0.500") Bore
Stock #176606-01  5/8" (0.625") Bore

Stock #176597-01  5 mm Bore
Stock #176598-01 6 mm Bore
Stock #176601-01  8 mm Bore

Stock #176603-01  10 mm Bore
Stock #176605-01  14 mm Bore

Download Product Drawings View options now

 


         

 
Press In/On Magnet Holder

Accurately positions magnet inside a 0.250" bore or on a 0.125” shaft.  For use with Model 30M Encoder Module.  Includes magnet.
Stock #176607-01  1/4" (0.250") Diameter Bore or 1/8" (0.125") Diameter Shaft

Download Product Drawings View options now

 


         

 
Installation Centering & Gapping Tool

Enables quick and easy installation of the Model 30M Encoder Module.
Stock #176615  Installation Centering & Gapping Tool

 

 


         

 
Raw Magnets

Raw magnets for custom applications.  For use with Model 30M Encoder Module.
Stock #030141  4 mm x 4 mm Cylindrical Magnet

 

 

 

 

Questions?