Connectors & Cables

Connectors & Cables

Your EPC encoder is designed to produce a clean, stable and reliable signal in a variety of operating conditions.  To ensure that your encoder signal reaches its intended destination—be it a counter, PLC or controller—use genuine AccuCoder™ cables and connectors.  Our shielded cable and mating connectors have been tested to meet stringent standards for quality and performance.  All cable assemblies are assembled in our in-house cable department in accordance with industry best practices.

EPC cable and mating connector assemblies (6-pin, 7-pin, 10-pin and 12-pin) can be ordered to your specified length and with the proper AccuCoder™ pin-out.  Also, both encoder cable and mating connectors can be ordered separately.  Our 5-pin and 8-pin M12 cord sets are available in a variety of lengths.  If you don’t see the length you need, contact Customer Service as other options may be available.

Mating Connectors

Stock #

Description

080014

6-pin MS type (MS3106A14S-6S-619)

 

080174

7-pin MS type (MS3106A16S-1S-618)

 

080113

10-pin MS type (MS3106A18-1S-618)

 

080533

6-pin MS type, 90° (MS 3108E 14S-6S) See TB-533 for installation guidelines

 

080534

7-pin MS type, 90° (MS 3108E 16S-1S) See TB-533 for installation guidelines

 

080535

10-pin MS type, 90° (MS 3108E 18-1S) See TB-533 for installation guidelines

 

080325-01

9-pin D-sub (AIM 40-9709S)

 

080021

10-pin Bayonet

 

080359

12-pin M23

 

080365

16-pin

 

080364

16-pin, CE

 

080023

19-pin (KPT06F14-19S)

 

 

 

Buy now

 

 

 

 

Incremental Encoder Connector/Cable Assemblies

To order a pre-wired cable and connector assembly, indicate the connector style, cable length and output configuration. All cable is 24 gauge double-shielded and rated to 105° C.

For wiring information on this cable, refer to 3xx Encoder Cable Assemblies.

Example: 310C-016-HV-R-N
16 ft, 10-pin MS Type, Line Driver, Quadrature w/Index, no CE

3___C Connector Style

06 6-pin MS Type

07 7-pin MS Type

 

09 9-pin D-Sub Miniature

10 10-pin MS Type

 

12 12-pin MS Type

H1 10-pin Bayonet

 

A6 6-pin MS Type, 90°

A7 7-pin MS Type, 90°

 

A1 10-pin MS Type, 90°

 

___ Cable Length

XXX Number of Feet

 

 

___ Output Type

ST OC, PU, PP, S, O

HV HV (Line Driver)

 

___ Channel Configuration

A Single Channel

Q Quadrature or Dual Channel

 

R Quadrature with Index Z

 

 

___ CE Compatible

Y Yes

N No

 

 

Buy now

 

 

 

 

Twisted-Shielded Pair/Low Capacitance Connector/
Cable Assemblies

To order a pre-wired cable and connector assembly, indicate the connector style, cable length and output configuration. All cable is 5 individually twisted shielded pairs, 24 gauge, 12 pF/ft, 105 ohms, and rated to 75° C.

For wiring information on this cable, refer to 4xx Twisted Pair Cable Assemblies.

Example: 410C-016-HV-R-N
16 ft, 10-pin MS Type, Line Driver, Quadrature w/Index, no CE

4___C Connector Style

10 10-pin MS Type

12 12-pin

 

00 No Connector, Cable only

H1 10-pin Bayonet

 

___ Cable Length

XXX Number of Feet

___ Output Type

HV HV (Line Driver)

___ Channel Configuration

A Single Channel

Q Quadrature or Dual Channel

 

R Quadrature with Index Z

 

 

___ CE Compatable

Y Yes

N No


Note: These cables are for use on differential line driver encoders only (codes HV & H7).

 

 

 

 

 

 

Absolute Encoder Connector/Cable Assemblies

To order a pre-wired cable and connector assembly, indicate the connector style and cable length. All cable is 28 or 30 AWG, shielded, and rated to 70° C.

For wiring information on this cable, refer to 5xx Absolute Encoder Cable Assemblies.  See Absolute Series Wiring of each model for pinouts.

Example: 510C-016-N
16 ft, 10-pin MS Type, no CE

5___C Connector Style

10 10-pin MS Type1

16 16-pin Connector2

 

19 19-pin Connector3

 

 

___ Cable Length

XXX Number of Feet

___ CE Compatible

Y Yes

N No


  1. 8 bit only. CE option not available.
  2. For use with up to and including 12 bit outputs.
  3. For use with up to and including 14 bit outputs or where fitted option used.

 

 

 

Buy now

 

 

 

M12 (12mm) Cordsets

Always use a shielded cordset.

8-Conductor Cordsets for use with 8-pin M12 Connectors

Stock #

Length

 

Shield not connected to Coupling Nut (see Technical Bulletin TB-111)

075100

0.5 Meters (1.64 ft)

 

075101

2 Meters (6.56 ft)

 

075102

4 Meters (13.12 ft)

 

075103

6 Meters (19.69 ft)

 

075104

10 Meters (32.81 ft)

 

Shield connected to Coupling Nut (see Technical Bulletin TB-111)

075200

2 Meters (6.56 ft)

 

075201

4 Meters (13.12 ft)

 

075202

6 Meters (19.69 ft)

 

075203

10 Meters (32.81 ft)

 

 

3, 4, and 5-Conductor Cordsets for use with 5-pin M12 Connector

Stock #

Description

Length

 

 

Shield not connected to Coupling Nut (see Technical Bulletin TB-111)

075205

3-Conductor

1 Meter (3.28 ft)

 

 

075206

4-Conductor

1 Meter (3.28 ft)

 

 

075204

5-Conductor

1 Meter (3.28 ft)

 

 

Shield connected to Coupling Nut (see Technical Bulletin TB-111)

075211

5-Conductor

1 Meter (3.28 ft)

 

 

 

 

Buy now

 

 

 

Molex Mating Cables

For use with Model 30M Encoder Module.

Stock #

Description

075230

8-pin Molex Mating Connector with 24" Cable (24 AWG Wires)

 

075232

16-pin Molex Mating Connector with 24" Cable (24 AWG Wires)

 

 

 

 

 

 

Buy now

 

 

 

 

 

Questions?